Encore Lighting - Manufacturer of exit signs and emergency lighting
Encore Lighting
Mailing Address:
57-10 49th Place Maspeth,
NY 11378

Phone: (718) 418-5600
Fax: (718) 418-5618
E-Mail: Info@EncoreLighting.com
Website: https://encorelighting.wpengine.com/
Print Back
The Series LPE is a precision molded Thermoplastic LED Exit sign, to be used as an economical alternative to die cast or steel units. The unit housing is molded from color stable, high impact UL94-5VA polycarbonate material. The frame front and canopy are of snap together design and attached to the housing utilizing invisible tabs. The standard housing finish is White, with a Brushed White face plate. Other finishes are available. The LPE Series provides bright even legend illumination, during both normal AC-On and battery backup upon utility failure.
  • Thermoplastic Injection Molded
  • LED Illuminated 6" Letters
  • Battery Backup or AC Only

Specifications

Operation

 N/A Battery

Letter Color

 N/A Red

No. of Faces

 N/A 1 Side

Options

 N/A Self Diagnostics

Electrical

N/A

  • Dual voltage input, 120/277 VAC. Contact factory for other voltages.
  • Line latching.
  • Constant current solid state voltage limited charge.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Includes momentary test switch and AC On visual indicator.

Housing

N/A

  • All components are injection molded of high impact UL94- 5VA polycarbonate material.
  • Exit face includes NFPA compliant snap-out and snap-in chevrons.
  • All electronic components including Nickel Cadmium batteries are prewired and assembled onto internal wire way chassis.
  • Canopy snaps on to housing without any hardware, minimal installation wiring is needed.
  • Universal J-box mounting pattern.

Details

N/A Battery:

  • Sealed, maintenance free Nickel Cadmium.
  • For use in high temperature environments.
  • The battery is protected from deep discharge by a low voltage disconnect circuit..
  • 90 minutes minimum discharge.
  • Full recharge time, 24 hours.
LED Lamps:
  • Ultra high brightness Aluminum Gallium Phosphate (AllnGaP) LEDs.
  • Both AC and Battery operation utilize the same set of LEDs. Brightness increases during battery operation.
Listing/Code Compliance:
  • UL 924 listed.
  • UL Damp location.
  • Life Safety NFPA101, NEC/OSHA
  • NYC MEA/BEC, Local Laws 16&41.
Warranty:
  • Battery, 15 years pro-rata.
  • Charger board, 5 years.
  • LED lamps, 25 years.

Energy Data

N/A Charge Mode (Fully Discharged Battery

LPE Series (NiCad Battery)

Input
(VAC)		 Input
Current (ma)		 Watts
120 25.2 25
277 11 27


Note: Figures based on fully discharged battery on high charge.