Encore Lighting - Manufacturer of exit signs and emergency lighting
Encore Lighting
Mailing Address:
57-10 49th Place Maspeth,
NY 11378

Phone: (718) 418-5600
Fax: (718) 418-5618
E-Mail: Info@EncoreLighting.com
Website: https://encorelighting.wpengine.com/
Print Back
Precision molded industrial fiberglass unit to be used in wet or hazardous environments. Perfect for food processing plants, outdoor stadiums, or wash down areas. The unit door is attached to the housing with a continuous hinge, and is fully gasketed. The EX Series pro vides 6 or 12 volt output, ranging from 15 through 72 watts rated for 90 minutes. Units can power multiple remote fixtures, or per form at full light output for up to 6 hours when no additional remote fixtures are added.
  • NEMA 4 & 12
  • Weatherproof Exit Sign
  • 6 or 12 Volt
  • 2 or 3 Heads
Product Image - NEMA EX Series
Dimension Drawing (NEMA EX)
Items Product Image - NEMA EX Series
6EX-15-0-TD-GXNEMA
NEMA EX Series 		Product Image - NEMA EX Series
6EX-15-0-IR-GXNEMA
NEMA EX Series 		Product Image - NEMA EX Series
6EX-15-0-IRRM-GXNEMA
NEMA EX Series 		Product Image - NEMA EX Series
6EX-15-0-NY-GXNEMA
NEMA EX Series 		Product Image - NEMA EX Series
6EX-15-1-TD-GXNEMA
NEMA EX Series
Wattage N/A 15 W
No. of Heads N/A No Heads N/A No Heads N/A No Heads N/A No Heads N/A 1 Head
Options N/A Time Delay N/A IR Test Option N/A IR Remote Unit N/A NYC Approved N/A Time Delay
Accessories N/A Wire Guard
Electrical N/A
  • Dual voltage input, 120/277 VAC. Contact factory for other voltages.
  • Line latching.
  • Constant current solid state voltage limited charger.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Includes sealed momentary test switch and AC-ON visual indicator
Housing N/A
  • Watertight and corrosion resistant fiberglass, UL wet location listed.
  • Industrial grey finish.
  • Gasketed, fully hinged front cover.
  • All electronic components including Lead Calcium batteries, are prewired and assembled onto internal wireway chassis.
  • Minimal installation wiring is needed.
Details N/A Lamp Heads:
  • Lamp heads are constructed of injection molded polymetric material. All heads utilize sealed beam, PAR 36 lamps, 6 or 12 volt. Heads are fully adjustable on bi-directional axis to allow nearly infinite aiming options.
  • Rotation stops are molded into all heads as per UL 924 specifications.
Battery:
  • Sealed, maintenance free Lead Calcium, recombinant cell.
  • The battery is protected from deep discharge by a low voltage disconnect circuit.
  • 90 minutes minimum discharge.
Lamps:
  • Emergency lamp heads use Par 36 Sealed Beam, 6 or 12 volt high lumen output lamps. Standard unit utilizes 12 watt heads.
Listing/Code Compliance:
  • UL 924 listed, Wet Location.
  • Life Safety NFPA 101, NEC/OSHA
  • NYC MEA/BEC, Local Laws 16 & 41.
Warranty:
  • Battery, 15yearpro-rata.
  • Charger board, 5 years.
Energy Data N/A Charge Mode (Fully Discharged Battery)

ELP Series (Lead Calcium Battery)

Unit Input
(VAC)		 Input
Current (ma)		 Watts
6EX27 120 40 4.4
6EX27 277 23 6.7
6EX36 120 40 4.4
6EX36 277 23 6.7
12EX36 120 50 5.4
12EX36 277 27 6.7
12EX72 120 50 5.4
12EX72 277 27 6.7


Note: Figures based on fully discharged battery on high charge.