Encore Lighting - Manufacturer of exit signs and emergency lighting
Encore Lighting
Mailing Address:
57-10 49th Place Maspeth,
NY 11378

Phone: (718) 418-5600
Fax: (718) 418-5618
E-Mail: Info@EncoreLighting.com
Website: https://encorelighting.wpengine.com/
Print Back
The PC6 series is the ideal economical choice for basic emergency lighting. The one piece unit body is injection molded using color stable, high impact UL 94-5V rated polycarbonate material. Emergency output is provided from two adjustable, square molded heads. The PC6 unit provides 6 volt output, ranging from 10 through 24 watts rated for 90 minutes. Unit can be wall or ceiling mounted.
  • Thermoplastic Injection Molded
  • Emergency Unit
  • Square Heads
  • 6 Volt
Product Image - PC6 Series
Dimension Drawing (PC6)
Items Product Image - PC6 Series
PC6-10-V-GXPU
PC6 Series 		Product Image - PC6 Series
PC6-10-V-VRBPU
PC6 Series 		Product Image - PC6 Series
PC6-10-V-3CP
PC6 Series 		Product Image - PC6 Series
PC6-10-V-37CP
PC6 Series 		Product Image - PC6 Series
PC6-10-A-GXPU
PC6 Series
Voltage N/A 6 V
Wattage N/A 10 W
Options N/A Voltmeter N/A Voltmeter N/A Voltmeter N/A Voltmeter N/A Ammeter
Accessories N/A Wire Guard N/A Vandal Bubble N/A 120 V, Cord & Plug N/A 277 V, Cord & Plug N/A Wire Guard
Electrical N/A
  • Dual voltage input, 120/277 VAC. Contact factory for other voltages.
  • Line latching.
  • Constant current solid state voltage limited charge.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Circuit board includes momentary test switch and AC-ON visual indicator.
Housing N/A
  • Injection molded of polycarbonate, high impact UL 94-5VA material.
  • Housing color will not vary with prolonged exposure to UV radiation.
  • Standard finish is White.
  • Universal J-box mounting pattern.
  • Unit can be wall or ceiling mounted. Keyhole mounting slots are provided.
  • All components are of snap-fit construction.
  • Housing includes cutout for surface mounted conduit use.
  • All electronic components, including Lead Calcium batteries, are pre-wired and assembled onto internal wireway chassis.
  • Minimal installation wiring is needed.
Details N/A Lamp Heads:
  • Lamp heads are square molded type. Front lens assembly is injection molded from crystal clear acrylic with precision molded linear spread pattern for efficient lumen output.
  • Emergency lamp output can be directed 358 degrees on a bidirectional axis for nearly universal aiming options.
Battery:
  • Sealed maintenance free Lead Calcium, recombinant cell.
  • Option for sealed maintenance free Nicad battery.
  • The battery is protected from deep discharge by a low voltage disconnect circuit.
  • 90 minutes minimum discharge.
Lamps:
  • Emergency lamp heads use wedge base, T5, tungsten high lumen output. Standard unit utilizes 5.4watt heads. Higher wattages are available.
Listing/Code Compliance:
  • UL 924 listed
  • Life Safety NFPA101, NEC/OSHA
  • NYC MEA/BEC, Local Laws 16 & 41.
Warranty:
  • Battery, 5 year pro-rata.
  • Charger board, 5 years.
Energy Data N/A Charge Mode (Fully Discharged Battery)

PFC6-10 Series (Lead Calcium Battery)

Unit Input
(VAC)		 Input
Current (ma)		 Watts
PC6-10 120 40 44
PC6-10 277 23 67
PC6-15 120 40 48
PC6-15 277 27 7.1
PC6-24 120 46 50
PC6-24 277 29 7.3


Note: Figures based on fully discharged battery on high charge.