PRODUCT CATALOG

Search Catalog

Request Information
The PC6 series is the ideal economical choice for basic emergency lighting. The one piece unit body is injection molded using color stable, high impact UL 94-5V rated polycarbonate material. Emergency output is provided from two adjustable, square molded heads. The PC6 unit provides 6 volt output, ranging from 10 through 24 watts rated for 90 minutes. Unit can be wall or ceiling mounted.
  • Thermoplastic Injection Molded
  • Emergency Unit
  • Square Heads
  • 6 Volt

Voltage

 N/A 6 V

Wattage

 N/A 10 W

Options

 N/A IR Test Option

Accessories

 N/A Wire Guard

N/A

  • Dual voltage input, 120/277 VAC. Contact factory for other voltages.
  • Line latching.
  • Constant current solid state voltage limited charge.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Circuit board includes momentary test switch and AC-ON visual indicator.

N/A

  • Injection molded of polycarbonate, high impact UL 94-5VA material.
  • Housing color will not vary with prolonged exposure to UV radiation.
  • Standard finish is White.
  • Universal J-box mounting pattern.
  • Unit can be wall or ceiling mounted. Keyhole mounting slots are provided.
  • All components are of snap-fit construction.
  • Housing includes cutout for surface mounted conduit use.
  • All electronic components, including Lead Calcium batteries, are pre-wired and assembled onto internal wireway chassis.
  • Minimal installation wiring is needed.

N/A Lamp Heads:

  • Lamp heads are square molded type. Front lens assembly is injection molded from crystal clear acrylic with precision molded linear spread pattern for efficient lumen output.
  • Emergency lamp output can be directed 358 degrees on a bidirectional axis for nearly universal aiming options.
Battery:
  • Sealed maintenance free Lead Calcium, recombinant cell.
  • Option for sealed maintenance free Nicad battery.
  • The battery is protected from deep discharge by a low voltage disconnect circuit.
  • 90 minutes minimum discharge.
Lamps:
  • Emergency lamp heads use wedge base, T5, tungsten high lumen output. Standard unit utilizes 5.4watt heads. Higher wattages are available.
Listing/Code Compliance:
  • UL 924 listed
  • Life Safety NFPA101, NEC/OSHA
  • NYC MEA/BEC, Local Laws 16 & 41.
Warranty:
  • Battery, 5 year pro-rata.
  • Charger board, 5 years.

N/A Charge Mode (Fully Discharged Battery)

PFC6-10 Series (Lead Calcium Battery)

Unit Input
(VAC)		 Input
Current (ma)		 Watts
PC6-10 120 40 44
PC6-10 277 23 67
PC6-15 120 40 48
PC6-15 277 27 7.1
PC6-24 120 46 50
PC6-24 277 29 7.3


Note: Figures based on fully discharged battery on high charge.