PRODUCT CATALOG

Search Catalog

Request Information
The Encore ERG is a fully recessed, self contained, emergency lighting unit. The ERG combines the aesthetics of recessed downlighting with the performance and functionality of a self contained emergency lighting unit. The recessed housing can be installed in either "New Work" open ceiling installations, or in "Retrofit" existing installations where access above the ceiling plenum is restricted, ie. existing sheetrock. The ERG housing and frame kit are constructed of 18 gauge die formed steel. The finishing Trim/Head assembly is a Par 36 Sealed Beam lamp. The Trim/Head assembly is mounted within a Gimbal Ring assembly, allowing lamp adjustment up to 45 degrees. Both 6V and 12V units are available in a variety of total wattage outputs. The ERG can power multiple remotes, or perform at full light output for up to 4 hours when no additional remotes are added. Standard trim finish is electrostatic powder coated White, other trim finishes available, see ordering chart. Inner chassis and wire way are completely prewired and assembled for 2 minute installation.
  • 6 or 12 Volt
  • Recessed Gimbal Ring
  • Lead Calcium Battery

Voltage

 N/A 6 V

Battery Capacity

 N/A 30

Options

 N/A 12 Volt,25 Watt Lamp

N/A

  • Dual voltage input, 120/277 VAC, 60 Hz. Contact factory for other voltages.
  • Line latching
  • Constant-current solid state volt age limited charger.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.

N/A

  • Fully recessed,18 gauge, die formed steel.
  • New Work housing includes adjustable 27" mounting bars.
  • Retrofit Old Work housing includes self adjusting mounting clips to hold housing in a closed ceiling.
  • All electronic components including Lead Calcium batteries are prewired and assembled onto internal wireway chassis. Minimal installation wiring is needed.
  • Housing has isolated j-box for all electrical connections.

N/A Battery:

  • Sealed, maintenance free Lead Calcium, recombinant cell.
  • Deep discharge does not damage battery due to low voltage disconnect.
  • 90 minutes minimum discharge.
Gimbal Trim/Head Assembly:
  • The Trim/Head assembly is mounted flush to the ceiling. Attaches to recessed housing using invisible torsion springs.
  • Standard Trim finish is White. Specular Clear and Gold are available.
  • Lamp is Par 36 Sealed Beam type. Up to 25 watts, 6 or 12 Volt.
  • Gimbal Ring construction allows lamp aiming up to 45 degrees.
  • Integral test switch and AC-ON indicator are installed on the Gimbal Trim.
Lamp:
  • Par 36 Sealed Beam type.
  • Various wattages available up to 25 watts.
  • 6 or 12 volt. Listing/Code Compliance:
  • UL 924 listed
  • Life Safety NFPA101, NEC/OSHA.
  • NYC MEA/BEC, Local Laws 16&41.
Warranty:
  • Battery, 5 year pro-rata.
  • Charger board, 5 years.

N/A

Item Watts
ERG-5 4.4
ERG-12 4.6