PRODUCT CATALOG

Search Catalog

Request Information
Low profile precision die formed steel housing. This unit is only a little over 6" high. One piece unit body with two or three high intensity tungsten lamp heads, 12 watts per head is standard. Both 6 and 12 volt units range from 27 through 72 watts output, rated for 90 minutes. Units can power multiple remotes, or perform at full light output for up to 6 hours when no additional remotes are added. 20 gauge housing is impact resist ant. Heads are front mounted for lower overall height. Electrostatic powder coat paint finish is scratch resistant. Inner chassis and wire way are completely prewired and assembled for 2 minute installation. The battery is held in place with an internal bracket to allow for ceiling mounted applications.
  • 6 or 12 Volt
  • Low Profile
  • 2 or 3 Head Unit
  • Lead Calcium Battery

Voltage

 N/A 6 V

Wattage

 N/A 27 W

No. of Heads

 N/A 2 Heads

Options

 N/A IR Remote Unit

Accessories

 N/A 120 V, Cord & Plug

N/A

  • Dual voltage input, 120/277 VAC,60 Hz. Contact factory for other voltages.
  • Line latching
  • Constant current solid state voltage limited charger.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Circuit board includes momentary test switch and AC-ON visual indicator.

N/A

  • 20 gauge, die formed steel. Housing frame formed using 1 piece of steel. Electrostatic powder coat. Standard finish is White. Other finishes available.
  • All electronic components including Lead Calcium batteries are prewired and assembled onto internal wireway chassis. Minimal installation wiring is needed.
  • Housing has additional "Head" knockouts to relocate heads to the side of the unit.
  • Back plate has universal j-box mounting pattern.

N/A Lamp Heads:

  • Lamp heads are constructed of injection molded polymetric material. Heads are fully adjustable on bi-directional axis to allow nearly infinite aiming options. Front lens assembly is injection molded from crystal clear acrylic with precision molded linear spread pattern for efficient lumen output.
  • Rotation stops are molded into all heads as per UL 924 specifications.
Battery:
  • Sealed, maintenance free Lead Calcium, recombinant cell.
  • Deep discharge does not damage battery due to low voltage disconnect.
  • 90 minutes minimum discharge. Lamps:
  • EMERGENCY LAMP HEADS Wedge based, T5, tungsten high lumen output. Standard unit utilizes 12 watt heads.
Listing/Code Compliance:
  • UL 924 listed
  • Life Safety NFPA101, NEC/OSHA
  • NYC MEA/BEC, Local Laws 16 & 41.
Warranty:
  • Battery, 5 year pro-rata.
  • Charger board, 5 years.

N/A Charge Mode (Fully Discharged Battery)

ELP Series (Lead Calcium Battery)

Unit Input
(VAC)		 Input
Current (ma)		 Watts
6ELP27 120 40 4.4
6ELP27 277 23 6.7
6ELP36 120 40 4.4
6ELP36 277 23 6.7
6ELP54 120 50 5.4
6ELP54 277 27 6.7
6ELP72 120 50 5.4
6ELP72 277 27 6.7


Note: Figures based on fully discharged battery on high charge.