PRODUCT CATALOG

Search Catalog

The LPCX series is the ideal economical choice for basic Exit and Emergency lighting. The one piece unit body is injection molded using color stable, high impact UL 94-5V rated polycarbonate material. The LPCX Exit combination unit features an LED illuminated Exit sign as well as Emergency lighting heads to achieve effective egress signage and ambient emergency lighting. Emergency output is provided from two adjustable, square molded heads. Unit can be wall or ceiling mounted.
  • Combination Exit/Emergency
  • Thermoplastic Injection Molded
  • Square Heads
Request Information
Items
Product Image - LPCX series

LPCX Series
Product Image - LPCX series

LPCX Series
Product Image - LPCX series

LPCX Series
Product Image - LPCX series

LPCX Series
Product Image - LPCX series

LPCX Series
Letter Color N/A 6" Red
No. of Faces N/A Single
Options N/A Voltmeter N/A Voltmeter N/A Voltmeter N/A Voltmeter N/A Ammeter
Accessories N/A Wire Guard N/A Vandal Bubble N/A 120 V, Cord & Plug N/A 277 V, Cord & Plug N/A Wire Guard
Electrical N/A
  • Dual voltage input, 120/277 VAC. Contact factory for other voltages.
  • Line latching.
  • Constant current solid state voltage limited charge.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Circuit board includes momentary test switch and AC On visual indicator.
Housing N/A
  • Injection molded of polycarbonate, high impact UL 94-5VA material.
  • Housing color will not vary with prolonged exposure to UV radiation.
  • Standard finish is white.
  • Universal J-box mounting pattern.
  • Unit can be wall or ceiling mounted. Keyhole mounting slots are provided.
  • All components of of snap-fit construction.
  • Housing includes cutout for surface mounted conduit use.
  • All electronic components, including Lead Calcium batteries, are pre-wired and assembled onto internal wireway chassis.
  • Minimal installation wiring is needed.
Details N/A Lamp Heads:
  • Lamp heads are square molded type. Front lens assembly is injection molded from crystal clear acrylic with precision molded linear spread pattern for efficient lumen output.
  • Emergency lamp output can be directed 358 degrees on a bidirectional axis for nearly universal aiming options.
  • The emergency heads are mounted on invisible pivots and can be field adjusted to the top of the unit, or any point in between.
Battery:
  • Sealed maintenance free Lead Calcium, recombinant cell
  • The battery is protected from deep discharge by a low voltage disconnect circuit.
  • 90 minutes minimum discharge.
Lamps:
  • Emergency lamp heads use wedge base, T5, tungsten high lumen output. Standard unit utilizes 5.4watt heads. Higher wattages are available.
  • Exit is illuminated by ultra high brightness Aluminum Gallium Phosphate (AllnGaP) LEDs. Both AC and battery operation utilize the same set of LEDs. Exit consumes 2.5 watts.
Listing/Code Compliance:
  • UL 924 listed
  • Life Safety NFPA 101.NEC/OSHA
  • UL Damp location approved
Warranty:
  • Battery, 5 year pro-rata.
  • Charger board, 5 years.
  • LED lamps, 25 years.
Energy Data N/A Charge Mode (Fully Discharged Battery)

LPCX Series (Lead Calcium Battery)

Unit Input
(VAC)		 Input
Current (ma)		 Watts
LPCX 120 40 4.4
LPCX 277 23 6.7


Note: Figures based on fully discharged battery on high charge.