PRODUCT CATALOG

Search Catalog

Request Information
Precision die formed steel housing. One piece unit body welded at all joints. The 12EB unit provides 12 volt output, ranging from 100 thru 400 watts rated for 90 minutes. Units can power multiple remotes, or per form at full light output for up to 16 hours when no additional remotes are added. 16 gauge housing is impact resistant. Electrostatic powder coat paint finish is scratch resistant. Inner chassis and wireway are completely prewired and assembled for 2 minute installation.
  • 12 Volt
  • Industrial High Capacity
  • Lead Calcium Battery

Wattage

 N/A 200 W

No. of Heads

 N/A No Heads

Options

 N/A Ammeter

Accessories

 N/A Mounting Shelf

N/A

  • Dual voltage input, 120/277 VAC.60 Hz. Contact factory for other voltages.
  • Line latching
  • Constant current solid state voltage limited charger.
  • Solid state transfer switching.
  • Circuit design includes brownout protection, low voltage battery disconnect, and short circuit protection.
  • Circuit board includes momentary test switch and AC-ON visual indicator.

N/A

  • 16 gauge, die formed steel. Housing frame formed using 1 piece of steel. Electrostatic powder coat. Standard finish is White. Other finishes available.
  • All electronic components including Lead Calcium batteries are prewired and assembled onto internal wireway chassis. Minimal installation wiring is needed.
  • Housing has additional "Head" knockouts to relocate heads to the side of the unit.
  • Back plate has universal j-box mounting pattern.

N/A Lamp Heads:

  • Lamp heads are constructed of injection molded polymetric material. Heads are fully adjustable on bi-directional axis to allow nearly infinite aiming options. Front lens assembly is injection molded from crystal clear acrylic with precision molded linear spread pattern for efficient lumen output.
  • Rotation stops are molded into all heads as per UL 924 specifications.
Battery:
  • Sealed, maintenance free Lead Calcium, recombinant cell.
  • Deep discharge does not damage battery due to low voltage disconnect,
  • 90 minutes minimum discharge.
Lamps:
  • Wedge based, T5, tungsten high lumen output. Standard unit utilizes 12 watt heads.
Listing/Code Compliance:
  • UL 924 listed
  • Life Safety NFPA101, NEC/OSHA
  • NYC MEA/BEC, Local Laws 16 & 41.
Warranty:
  • Battery, 5 year pro-rata.
  • Charger board, 5 years.

N/A Charge Mode (Fully Discharged Battery)

12EB Series (Lead Calcium Battery)

Unit Input
(VAC)		 Input
Current (ma)		 Watts
EB100 120 40 4.4
EB100 277 23 6.7
EB200 120 40 4.4
EB200 277 23 6.7
EB300 120 50 5.4
EB300 277 27 6.7
EB400 120 50 5.4
EB400 277 27 6.7


Note: Figures based on fully discharged battery on high charge.